-
Federal Territories Illustrated Postcard
UPDATED WITH LABUAN POSTCARD!
Here’s all the eight postcards in the series:
Download as print postcard: KL Illustrated Postcard VIII
Resolution: 300dpi, jpg, 1.80MBDownload and print postcard: Illustrated Postcard VII
Resolution: 300dpi, jpg, 1.7MBDownload and print postcard: Illustrated Postcard VI
Resolution: 300dpi, jpg, 1.5MBDownload as print postcard: KL Illustrated Postcard V
Resolution: 300dpi, jpg, 1.65MBDownload as print postcard: KL Illustrated Postcard IV
Resolution: 300dpi, jpg, 1.8MBDownload as print postcard: KL Illustrated Postcard III
Resolution: 300dpi, jpg, 1.5MBDownload and print postcard: KL Illustrated Postcard II
Resolution: 300dpi, jpg, 2.9MBDownload and print postcard: KL Illustrated Postcard I
Resolution: 300dpi, jpg, 2.56MBTerms of Use
You can use them long as it’s for personal use only.Instruction
You need:- a two-sheet card (120gm)
- a clear self-adhesive lamination sheet
- Spray mount or PVA glue
- and of course a color-printer.
Instructions:
- After printing, cut along the dotted line and fold by half.
- Glue the inside by using spray mount or if you don’t have spray mount, use PVA glue and use a piece of cardboard to spread the glue evenly.
- Fold it and keep it under thick book for a while.
- Cut the lamination sheet just about the size of the postcard.
- Stick the sheet onto the image side of the postcard. Take a piece of cardboard and squeegee the sheets until it’s even.
- Trim the edge nicely.
- Keep it under the thick book again for half an hour.
- Now you can send it safely to any destinations of the world!
Note: If your printer’s inks are waterproof or if you’re using laserjet printer, you can skip the lamination process.